niklas/ros2_tracing
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
ros2_tracing/README.md
Christophe Bedard bffe4c2a68 Update README to mention new location for traces
2019-07-05 17:13:00 +02:00

1.5 KiB
Raw Blame History

tracetools

Tracing tools for ROS 2.

Building

If tracing is not enabled when building, or if LTTng is not found, then this package will not do anything.

To enable tracing:

  1. Install LTTng with the Python bindings to control tracing and read traces: 
    $ sudo apt-add-repository ppa:lttng/stable-2.10
$ sudo apt-get update
$ sudo apt-get install lttng-tools lttng-modules-dkms liblttng-ust-dev
$ sudo apt-get install python3-babeltrace python3-lttng
    Note: the LTTng stable 2.10 PPA is used to get newer versions of the packages.
  2. Build with the WITH_LTTNG flag: 
    $ colcon build --cmake-args " -DWITH_LTTNG=ON"
  3. Source and check that tracing is enabled: 
    $ source ./install/local_setup.bash
$ ros2 run tracetools tracetools_status

Tracing

The steps above will not lead to trace data being generated, and thus they will have no impact on execution. LTTng has to be enabled. The packages in this repo provide two options.

Trace command

The first option is to use the ros2 trace command.

$ ros2 trace

By default, it will enable all ROS tracepoints and a few kernel tracepoints. The trace will be written to ~/.ros/tracing/session-YYYYMMDDHHMMSS. Run the command with -h for more information.

Launch file trace action

Another option is to use the Trace action in a launch file along with your Node action(s).

See this example launch file for more information.