cyclonedds/examples/perfscript/throughput-test

#!/bin/bash

export nwif=eth0
bandwidth=1e9
remotedir="$PWD"
provision=false
asynclist="sync async"
modelist="listener polling waitset"
sizelist="0 20 50 100 200 500 1000 2000 5000 10000 20000 50000 100000 200000 500000 1000000"
timeout=30
loopback=true
resultdir="throughput-result"

usage () {
    cat >&2 <<EOF
usage: $0 [OPTIONS] user@remote [user@remote...]

OPTIONS
  -i IF        use network interface IF (default: $nwif)
  -b 100|1000|B  network bandwidth (100Mbps/1000Gbps or B bits/sec) for
               calculating load % given load in bytes/second (default: 1000)
  -d DIR       use DIR on remote (default: PWD)
  -p           provision required binaries in DIR (default: $provision)
               first ssh's in to try mkdir -p DIR, then follows up with scp
  -t DUR       run for DUR seconds per size (default $timeout)
  -a ASYNCLIST run for delivery async settings ASYNCLIST (default:
               "$asynclist")
  -m MODELIST  run with subscriber mode settings MODELIST (default: 
               "$modelist")
  -s SIZELIST  run for sizes in SIZELIST (default: "$sizelist")
               if SIZELIST is empty, it uses ddsperf's OU topic instead
  -l LOOPBACK  enable/disable multicast loopback (true/false, default: $loopback)
  -o DIR       store results in dir (default: $resultdir)

Local host runs "ddsperf" in subscriber mode, first remote runs it publisher
mode, further remotes also run subcribers.  It assumes these are available in
DIR/bin.  It also assumes that ssh user@remote works without requiring a
password.
EOF
    exit 1
}

while getopts "i:b:d:pa:m:s:t:o:l:" opt ; do
    case $opt in
        i) nwif="$OPTARG" ;;
        b) case "$OPTARG" in
               100) bandwidth=1e8 ;;
               1000) bandwidth=1e9 ;;
               *) bandwidth="$OPTARG" ;;
           esac ;;
        d) remotedir="$OPTARG" ;;
        p) provision=true ;;
        a) asynclist="$OPTARG" ;;
        m) modelist="$OPTARG" ;;
        s) sizelist="$OPTARG" ;;
        l) loopback="OPTARG" ;;
        t) timeout="$OPTARG" ;;
        o) resultdir="$OPTARG" ;;
        h) usage ;;
    esac
done
shift $((OPTIND-1))
if [ $# -lt 1 ] ; then usage ; fi
pubremote=$1
shift

cfg=cdds-simple.xml
cat >$cfg <<EOF
<CycloneDDS>
  <Domain>
    <Id>17</Id>
  </Domain>
  <General>
    <NetworkInterfaceAddress>$nwif</NetworkInterfaceAddress>
    <EnableMulticastLoopback>$loopback</EnableMulticastLoopback>
    <MaxMessageSize>65500B</MaxMessageSize>
    <FragmentSize>4000B</FragmentSize>
  </General>
  <Internal>
    <Watermarks>
      <WhcHigh>500kB</WhcHigh>
    </Watermarks>
    <SynchronousDeliveryPriorityThreshold>\${async:-0}</SynchronousDeliveryPriorityThreshold>
    <LeaseDuration>3s</LeaseDuration>
  </Internal>
  <Tracing>
    <Verbosity>config</Verbosity>
  </Tracing>
</CycloneDDS>
EOF

if [ ! -x bin/ddsperf ] ; then
    echo "bin/ddsperf not found on the local machine" >&2
    exit 1
fi

[ -d $resultdir ] || { echo "output directory $resultdir doesn't exist" >&2 ; exit 1 ; }

if $provision ; then
    echo "provisioning ..."
    for r in $pubremote "$@" ; do
        ssh $r mkdir -p $remotedir $remotedir/bin $remotedir/lib
        scp lib/libddsc.so.0 $r:$remotedir/lib
        scp bin/ddsperf $r:$remotedir/bin
    done
fi

topic=KS
[ -z "$sizelist" ] && topic=OU

export CYCLONEDDS_URI=file://$PWD/$cfg
for r in $pubremote "$@" ; do
    scp $cfg $r:$remotedir || { echo "failed to copy $cfg to $remote:$PWD" >&2 ; exit 1 ; }
done

for async_mode in $asynclist ; do
    case "$async_mode" in
        sync) async=0 ;;
        async) async=1 ;;
        *) echo "$async_mode: invalid setting for ASYNC" >&2 ; continue ;;
    esac
    export async
    for sub_mode in $modelist ; do
        echo "======== ASYNC $async MODE $sub_mode ========="
        
        cat > run-publisher.tmp <<EOF
export CYCLONEDDS_URI=file://$remotedir/$cfg
export async=$async
cd $remotedir
for size in ${sizelist:-0} ; do
  echo "size \$size"
  bin/ddsperf -D $timeout -T $topic pub size \$size > pub.log
  sleep 5
done
wait
EOF
        scp run-publisher.tmp $pubremote:$remotedir || { echo "failed to copy $cfg to $remote:$PWD" >&2 ; exit 2 ; }
        killremotesubs=""
        if [ $# -gt 0 ] ; then
            cat > run-subscriber.tmp <<EOF
export CYCLONEDDS_URI=file://$remotedir/$cfg
export async=$async
cd $remotedir
nohup bin/ddsperf -T $topic sub $sub_mode > /dev/null &
echo \$!
EOF
            for r in "$@" ; do
                scp run-subscriber.tmp $r:$remotedir
                rsubpid=`ssh $r ". $remotedir/run-subscriber.tmp"`
                killremotesubs="$killremotesubs ssh $r kill -9 $rsubpid &"
            done
        fi

        outdir=$resultdir/$async_mode-$sub_mode
        mkdir $outdir

        bin/ddsperf -d $nwif:$bandwidth -c -T $topic sub $sub_mode > $outdir/sub.log & spid=$!
        tail -f $outdir/sub.log & xpid=$!
        ssh $pubremote ". $remotedir/run-publisher.tmp"
        kill $spid
        eval $killremotesubs
        sleep 1
        kill $xpid
        wait
        scp $pubremote:$remotedir/pub.log $outdir
    done
done